Product Category · Produced Fluid · Produced Water · Wastewater
Produced Fluid & Water Treatment
LINSON OIL supplies produced-fluid and produced-water treatment systems covering separation, oil-water handling, filtration, coalescence, clarification, reinjection support, wastewater treatment and related field-water equipment.
Treatment capacity, outlet quality, oil content, suspended solids, filtration rating, chemical consumption and reinjection targets are project-specific. They are defined from the actual feed, downstream requirement and approved process basis.
01 / Category Overview
Treat the stream as a system, not as disconnected equipment.
Produced-fluid treatment normally involves several linked steps. The correct route depends on the incoming phases, solids, corrosion environment, downstream use, utility availability, operating philosophy and site constraints.
Produced Fluid
Coordinate oil, water, gas and solids handling around the complete field stream.
Produced Water
Configure oil removal, filtration, clarification, transfer and reinjection support according to the downstream requirement.
Wastewater / Utility Water
Support industrial wastewater and project-defined utility-water duties as standalone or integrated scope.
Integrated Packages
Combine vessels, pumps, filters, valves, instruments, controls and skid interfaces where required.
02 / Treatment Problems
Changing field streams require a coordinated treatment basis.
Mixed Phases
Oil, water, gas and solids may arrive together and change with field conditions.
Solids / Sand
Solids can affect separation, valves, pumps, filters, drains and maintenance requirements.
Corrosive Service
Produced water, salinity, H2S, CO2 and chemicals influence materials and protection measures.
Downstream Duty
Disposal, reuse, reinjection, transfer or further treatment each create different equipment requirements.
03 / Oil · Water · Solids Separation
Start by defining the incoming stream and the next process step.
Primary separation, oil-water handling and solids management are arranged around actual phase behavior, downstream equipment protection and operating access.
Primary Separation
Separate major phases and stabilize the feed to downstream treatment equipment.
Oil / Water Handling
Use settling, coalescing and transfer arrangements as required by the selected process route.
Solids Handling
Consider desanding, drainage, solids collection, cleaning access and disposal interfaces where needed.
04 / Filtration · Coalescence · Clarification
Add polishing stages only where the process requires them.
Filtration, coalescence and clarification are selected as part of the overall treatment train. Housing layout, bypasses, drains, maintenance access and instrumentation should be considered together.
Filtration
Protect downstream equipment or provide project-defined polishing duty without assuming a universal filtration rating.
Coalescence
Support additional oil-water separation where the selected process route requires it.
Clarification
Integrate clarification with upstream/downstream equipment and solids-handling requirements as applicable.
05 / Produced-Water Reinjection
Treat reinjection as a full upstream-to-injection interface.
Produced-water reinjection can involve treatment, filtration, transfer, pumping, instrumentation and control. The source water, downstream injection requirements, package boundaries and site utilities should be clarified before equipment selection.
Upstream Source
Clarify feed source, upstream treatment and expected operating variation.
Treatment / Filtration
Define the required treatment stages from the downstream reinjection basis.
Transfer / Pumping
Coordinate pumps, piping, valves and operating/control interfaces where included.
Injection Interface
Confirm battery limits, instrument/control signals and downstream responsibilities.
06 / Wastewater & Utility-Water Support
Support treatment, transfer and utility-water duties within the wider project.
Industrial wastewater treatment, demineralized-water packages, prefabricated pump stations and environmental recovery equipment can be supplied as project-defined standalone equipment or as part of a broader treatment system.
Industrial Wastewater
Review treatment route against stream characteristics, transfer/disposal path and project requirements.
Demineralized Water
Package project-defined utility-water treatment and delivery interfaces.
Collection / Transfer
Coordinate pump-station or transfer equipment with tankage, piping, controls and site interfaces.
Environmental Recovery
Support project-defined collection or recovery duties without assuming one universal equipment configuration.
07 / Selection Inputs
Selection starts with the feed and the required downstream duty.
LINSON OIL reviews Process Data, P&ID, Data Sheets, Technical Specifications and site information before finalizing the treatment route and scope.
Feed Composition
Oil, water, gas, solids, sand, chemicals, density, viscosity and phase behavior as applicable.
Operating Conditions
Flow/capacity basis, pressure, temperature, operating cases and expected variation.
Downstream Requirement
Reuse, disposal, reinjection, transfer or further-treatment basis and any customer limits provided.
Site / Project
Materials, corrosion, utilities, hazardous area, layout, transport, controls, inspection, documents and destination.
08 / System Integration · Instrumentation · Control
Coordinate the treatment equipment as one operable system.
Treatment systems can integrate vessels, filters, pumps, piping, valves, instruments, electrical items and control panels within a project-defined skid or modular arrangement.
Process Equipment
Separation, filtration, clarification, tanks, pumps and treatment equipment selected around the confirmed process duty.
Piping / Valves
Coordinate bypasses, drains, vents, isolation, transfer and battery-limit connections.
Instrumentation
Provide project-required measurements, alarms and monitoring interfaces.
Electrical / Control
Coordinate local panels, motors, controls, signals and communications as defined by the scope.
09 / Manufacturing & FAT
Control fabrication, integration and testing against the approved scope.
LINSON OIL coordinates engineering, procurement, vessel fabrication, pipe prefabrication, skid assembly, instrument/electrical/control integration, inspection, FAT, documentation and export delivery for project-defined treatment systems.
- 01
Material / Fabrication
Material verification, machining, welding and fabrication according to approved project requirements.
- 02
Package Integration
Coordinate equipment, piping, pumps, valves, instruments, electrical items and controls.
- 03
Inspection / Testing
Apply project-required dimensional inspection, applicable NDT, pressure/leak testing and functional checks.
- 04
FAT / Release
Coordinate customer/EPC/TPI participation and final release documentation where required.
10 / Solution & Project Evidence
Review treatment evidence in its application context.
The solution and application-portfolio pages provide the broader process logic and representative field context without turning project-specific results into universal performance claims.
Treatment System RFQ
Send the feed, downstream duty and treatment basis.
Useful inputs include Process Data, P&ID, Data Sheets, Technical Specification, feed composition, operating cases, required downstream use, utilities, corrosion basis, site constraints, instrumentation/control requirements, inspection/FAT and delivery destination.
Detailed datasheets, drawings and project-specific technical documents are prepared after the operating conditions, scope of supply and commercial basis have been sufficiently clarified.