Custom Oil & Gas Process Equipment
Separation, Filtration
& Desanding Equipment
Custom-engineered equipment for oil, gas, water and solids separation. Selection and configuration are developed around your process data, operating conditions, P&ID and project requirements.
Start with the separation duty and fluid conditions—not a generic catalog model—then define vessel, filtration, desanding, metering and skid scope from the actual project basis.
Core Equipment
Built for the realities of field fluids
Equipment selection and configuration are based on actual process conditions, not generic catalog assumptions.
Three-Phase Separator
Separates oil, gas and produced water in production, test, gathering and treatment applications.
■Oil / Gas / Water
View Equipment →Gas-Liquid Separator
Removes entrained liquid and droplets from gas streams to protect downstream equipment and improve process stability.
■Gas Scrubbing / Knockout
View Equipment →Metering & Test Separator
Supports well testing, allocation and production measurement with integrated process piping, instruments and controls.
■Well Test / Production Metering
View Equipment →Filter Separator
Captures particulate and liquid aerosols from gas or liquid streams where cleaner process media is required.
■Particulate / Liquid Removal
View Equipment →Cyclone Desander
Uses centrifugal separation to remove sand and solids from produced fluids, reducing erosion and downstream wear.
■Sand / Solids Control
View Equipment →Equipment Selection
Start with the process, not the product
Our engineering team reviews capacity, pressure, temperature, fluid composition, water cut, gas-oil ratio, solids content and installation limits before proposing equipment.
Discuss Your Operating Conditions- Oil / Gas / Water
- Three-Phase Separation
- Gas Stream Protection
- Gas-Liquid or Filter Separation
- Well Testing
- Metering & Test Separation
- Sand & Solids
- Cyclone Desanding
For mixed production fluids requiring oil, gas and water separation.
For liquid carryover, droplets, aerosols or particulate removal.
For controlled well test operations, measurement and production allocation.
For abrasive sand and solids that can damage piping, valves and equipment.
Configuration Options
Configured for your process and site
The following are common engineering and manufacturing routes across this equipment family. Availability varies by equipment type, process conditions, applicable code and project scope.
Orientation
Project-Specific Vessel Orientation
Pressure Design
Pressure Basis by Project
Integration
Skid-Mounted
Materials
Material Route by Equipment & Service
Corrosive Service
Corrosive-Service Review
Difficult Fluids
Sand / High-Water-Cut Review
Engineering & Project Evidence
From process review to factory acceptance
Engineering & Custom Design
Selection, sizing, drawings, piping, instruments and skid arrangement developed around your process data and project requirements.
View Engineering →Quality Control & FAT
Material traceability, welding control, applicable NDT, pressure testing, assembly inspection and FAT support according to project specifications.
View Quality Control →Project Reference
He50 Separator Skid
Oil-gas-water separation and metering equipment delivered as a modular separator-skid project reference.
View Project →Process Solution
Oil-Gas-Water Separation & Metering
See how separators, metering, controls and skid integration can be combined around the project process basis and battery limits.
View Solution →RFQ Input Checklist
Send the data that defines the equipment
Share available technical information and our engineering team will review the separation duty, operating conditions, equipment scope and project requirements. If no files are available, include gas and liquid flow rates, water cut, pressure, temperature, fluid properties, H2S / CO2, sand or solids, material or code requirements and project location.