Gas Processing Equipment & Skid Systems
Natural Gas Processing Equipment & Packages
LINSON OIL supplies natural-gas processing equipment and integrated packages for gas-liquid separation, dehydration, contaminant treatment, condensate stabilization, associated-gas/NGL recovery and LNG-related projects. Equipment selection starts with feed composition, operating conditions, required outlet conditions and the project scope.
- Feed basis
- Gas composition
- Operating basis
- Pressure & temperature
- Product basis
- Required outlet quality
- Project basis
- Scope & site conditions
Process Relationship Guide
Understand the treatment blocks before selecting equipment.
Natural-gas treatment is not one fixed sequence. The required blocks and their order depend on feed composition, water and hydrocarbon content, contaminants, pressure, temperature, downstream use and the specified product condition.
Gas-Liquid Separation
Remove bulk liquid and entrained droplets where required before or between downstream treatment stages.
View Gas-Liquid Separator →Dehydration
Select molecular-sieve or TEG treatment according to the process basis and downstream moisture requirement.
Contaminant Treatment
Evaluate acid-gas, sulfur or mercury treatment only where identified by feed analysis and project requirements.
Recovery & Product Handling
Condensate stabilization, associated-gas/NGL recovery or LNG-related treatment can follow the required product and utilization route.
Start with feed analysis
Share gas flow, composition, liquid content, pressure, temperature and known contaminants.
Define required product conditions
Clarify downstream use, moisture/contaminant requirements, liquid recovery objectives and applicable project specifications.
Confirm battery limits
Include utilities, controls, plot limits, transport, inspection and package interface requirements.
Gas Processing Portfolio
Equipment entry points for each critical treatment step.
Review the equipment category most relevant to your process. Our engineering team can help clarify interfaces between individual units and complete skid systems.
Inlet Conditioning
Gas-Liquid Separation
Gas-liquid separators and related inlet-conditioning equipment for removing bulk liquid and entrained droplets from gas streams before or between downstream treatment stages.
View Gas-Liquid SeparationDehydration
Molecular Sieve
Adsorption-based dehydration equipment for gas-processing applications where the process basis calls for a molecular sieve treatment route.
View Molecular Sieve SystemsDehydration
TEG Dehydration
Triethylene glycol dehydration packages and associated equipment configured around gas conditions, regeneration arrangement and project scope.
View TEG DehydrationContaminant Treatment
Sweetening & Desulfurization
Project-specific gas-treatment equipment for acid-gas or sulfur-related contaminants where feed analysis and the technical specification define this treatment requirement.
View Sweetening SolutionsLiquid Hydrocarbon Handling
Condensate Stabilization
Process equipment and skid configurations for condensate handling and stabilization duties within gas and associated-gas projects.
View Condensate StabilizationHydrocarbon Recovery
Associated Gas / NGL Recovery
Integrated equipment packages for associated-gas handling and NGL recovery projects, developed around available feed and downstream requirements.
View Recovery PackagesLiquefaction Project Support
LNG
Gas-conditioning, treatment and package equipment for LNG-related projects, assessed according to feed quality, site utilities and project interfaces.
View LNG Equipment ScopeSpecialized Gas Treatment
Dehydration & Mercury Removal
Project-specific treatment package for cases where both moisture control and mercury removal are identified in the gas analysis and downstream process specification.
View Treatment EquipmentProcurement Selection Checklist
Give engineering the basis needed to clarify the equipment scope.
Early clarification helps align equipment configuration, materials, interfaces, documents, inspection requirements and commercial scope before quotation.
Recommended RFQ information
Available information can be shared in stages. Process data, P&ID and data sheets are especially useful for technical review.
-
01
Feed gas and liquid information
Flow range, gas composition, liquid and solids content, density, molecular weight and any known contaminants.
-
02
Operating and design conditions
Normal, minimum and maximum pressure and temperature, operating profile, utility availability and ambient conditions.
-
03
Required outlet and downstream use
Target gas quality, destination, downstream equipment, liquid handling requirements and any stated project specifications.
-
04
Scope and project interfaces
Required skid boundaries, piping and instrumentation interfaces, controls, documents, inspection, packing and delivery destination.
Solutions, Projects & Capabilities
Follow the process from equipment selection to project execution.
Gas-processing procurement usually connects individual equipment, process packages, project references, skid integration and quality-control requirements.
Natural Gas Dehydration & Treatment
Connect separation, dehydration and project-specific contaminant treatment around the required gas condition.
View Solution → SolutionCondensate Stabilization
Review condensate handling and stabilization as part of the wider gas-processing train.
View Solution → SolutionAssociated Gas Recovery & Utilization
Link gas conditioning, recovery, NGL/LNG-related equipment and downstream utilization requirements.
View Solution → SolutionModular Skid Process Packages
Integrate vessels, piping, valves, instruments, electrical systems and controls into a defined package boundary.
View Solution →Shunbei Molecular Sieve Dehydration
Molecular-sieve dehydration project reference for natural-gas treatment.
ProjectLongfengshan Condensate Stabilization
Condensate-stabilization reference using a process train with heat exchange and stabilization equipment.
ProjectCongo Associated Gas / NGL / LNG
Associated-gas recovery, light-hydrocarbon recovery and LNG-related project experience.
ProjectWushi Oilfield Equipment
Oilfield terminal equipment experience connected with crude-oil treatment and natural-gas/LNG processing functions.
Natural Gas Processing RFQ
Share the feed basis and required gas condition.
Send the available gas composition, process data, P&ID, Data Sheet, Technical Specification or equipment list. LINSON OIL will review the required treatment steps and package interfaces before quotation.
Detailed datasheets, drawings and project-specific technical documents are prepared after the operating conditions, scope of supply and commercial basis have been sufficiently clarified.
Useful documents
- Process Data / gas composition
- P&ID / process flow diagram
- Equipment Data Sheet / Technical Specification
- Required outlet condition / downstream use
- Equipment list, GA or battery-limit information