Petroleum Equipment Built for the Field.
Engineered for the Application.
Proven in Operation.
LINSON OIL doesn't make general industrial equipment. Everything we manufacture is purpose-built for oil and gas — upstream production, gas processing, terminal operations, and EPC project supply. 21+ years. 5,000+ projects.
Upstream Oil & Gas Production
What This Covers
Wellhead production, gathering stations, single-well and multi-well pad operations, oil/gas/water separation, produced water handling, crude oil dehydration, and well-site metering.
The Challenge
Upstream equipment operates continuously in harsh field conditions — high water cut, sand, fluctuating inlet pressure, remote locations. Equipment failure means production downtime. Buyers need reliable, field-proven equipment with minimal maintenance and fast deployment.
Reference Project
Xianhe Oilfield — He50 Well Area
Three-Phase Separator Skid Package — modular oil/gas/water separation with integrated metering and export. Fully factory pre-fabricated for rapid site installation.
What LINSON OIL Supplies
Modular Site Solutions
- ›Multi-Function Collectors: Integrates separation, heating, metering, loading. Off-grid capable.
- ›Wellhead Valve Skids: Manifold assemblies for multi-well pads.
- ›Elevated Storage Tanks: 40m³ standard with heating options.
- ›Field Camp Houses: Relocatable harsh-environment living quarters.
Full-Chain Integrated Supply Scope
Gas-Liquid Separation at Wellhead
Gas-Liquid Separators / Buffer Separators. Three-Phase Separator Skids (oil/gas/water at source).
Gas Gathering & Compression
Gas Manifold / Knockout Drums. Pig Launcher / Receiver Skids (pipeline integrity maintenance).
Gas Dehydration
NGL Recovery & Stabilization
LNG / LPG Production
Heating & Integration
Vacuum Phase-Change Heaters / Water Bath Heaters. Complete associated gas recovery skid packages — process design through FAT, single-source supply.
Associated Gas Recovery & Utilization
What This Covers
Capture and processing of associated gas produced alongside crude oil. Applications: flare elimination, gas-to-power, NGL extraction, LNG production, fuel gas supply, and carbon reduction compliance.
Why This Matters Now
Flaring regulations are tightening globally. Associated gas that was previously flared now represents both a regulatory liability and a recoverable revenue stream.
The Challenge
Associated gas recovery requires a full process chain — separation, compression, dehydration, NGL extraction, LNG liquefaction. Few manufacturers can supply the complete integrated system.
Associated Gas Intelligent Recovery & Utilization System
Shandong Province First-of-its-Kind Equipment designation.
Reference Project
Congo (Brazzaville) — Jiarou Oilfield
- Phase I: 100×10⁴ Nm³/d NGL recovery
- Phase II: 200×10⁴ Nm³/d gas + 100×10⁴ Nm³/d LNG
- Phase III: 100×10⁴ Nm³/d gas + 100×10⁴ Nm³/d LNG
Full international delivery and commissioning support.
NGL / LNG / LPG Processing
What This Covers
Natural gas liquids extraction, liquefied natural gas production, liquefied petroleum gas recovery, condensate stabilization, and gas-to-product processing for commercial sale or fuel supply.
The Challenge
NGL/LNG/LPG processing requires precise process engineering — feed gas composition analysis, phase equilibrium design, column sizing. Equipment must be engineered to the specific feed gas composition and target product specification. Off-the-shelf products don't work here.
Reference Projects
Sinopec Northeast Bureau — Longfengshan
Condensate Stabilization Unit (Rectification + stripping; light component removal).
Sinopec Northwest Bureau — Shunbei No.5
Molecular Sieve Dehydration Skid (deep dehydration for Ordovician reservoir gas).
Core Processing Equipment & Engineering
Condensate Stabilization Columns
Rectification + stripping process. Removes light components (C1, C2) from unstabilized condensate. Produces stabilized condensate meeting RVP spec for storage/transport.
Feed: from metering & production separators
Packed Towers
Absorption and stripping for NGL extraction. Structured packing (high efficiency, low pressure drop) and random packing options. NGL stabilization service.
Molecular Sieve Dryers
Feed gas dehydration before cryogenic or refrigeration processing. Achieves pipeline spec and LNG feed gas water dew point. Modular twin-tower design with automatic regeneration cycling.
Gas Processing Skids
NGL recovery skids, LNG liquefaction skids, LPG recovery and fractionation skids. Associated gas utilization and compression integration.
In-House Engineering Capability
Process design from feed gas composition data · Heat and material balance calculations · P&ID development and equipment sizing · Full skid integration from process design to FAT.
Offshore & Onshore Terminal Processing
Onshore receiving terminals for offshore production. Crude oil stabilization, dehydration, desalting, and export. Gas processing, mercury removal, and product separation at centralized processing facilities.
Separation & Processing
- Three-Phase Separators: High water-cut/GOR, automated sand removal.
- Packed Towers: Gas sweetening and NGL stabilization.
- Molecular Sieve Dryers: Deep dehydration for export/LNG feed.
- Desalting Modules: Electric desalting + three-phase separation.
Storage & Heating
- Fixed Pressure Vessels: A2 + High-Pressure, GB 150 compliant.
- Storage Tanks: Atmospheric & Elevated with heating options.
- Terminal Heating: Vacuum Phase-Change & Ex-Proof Electromagnetic.
CNOOC Wushi Oilfield
Onshore Terminal Facility
Scope
Processes water-cut crude oil and natural gas from offshore oilfields. Crude oil dehydration, gas stabilization, LNG liquefaction, LPG recovery, and mercury removal.
Key Equipment Supplied
Dehydration & Demercurization Skid
Awarded 2025
Shandong Province First-of-its-Kind Equipment designation.
EPC & Project Contracting
EPC contractors procuring petroleum equipment for project scopes. Engineering firms sourcing separation vessels, heating systems, pressure vessels, and skid packages as part of a larger project BOM.
The Challenge EPC Buyers Face
You're managing a project BOM with 20–50 line items. You need multiple equipment types from one or more vendors. Delivery schedules must align with your project timeline. Vendor qualification takes time — and you can't afford to qualify five separate manufacturers.
Submit Project BOMSingle-Source Supply
Separation equipment + heating systems + pressure vessels + skid packages — all from one manufacturer. One vendor qualification. One documentation package. One point of contact.
Qualification Credentials
- Special Equipment Mfg License (A2 + High-Pressure)
- Pressure Piping Components License (GC2)
- CNAS Accredited Lab · ISO 9001/14001/45001
- Sinopec & CNPC HSE Certified Supplier
Full Documentation per Project Requirement
One Manufacturer. Every Upstream Application.
Standard 2-Year Warranty
Double the industry average. Long-term partners: up to 2.5 years. We stand behind what we build.
No Core Subcontracting
Every piece of equipment is engineered, fabricated, tested, and documented at our own facility in Dongying, Shandong. You know exactly where your equipment comes from.
Tell Us Your Application.
We'll Tell You Exactly What We Can Build.
Select how you'd like to proceed below.
I want to see all products
Browse our complete product lines across Separation, Heating, Pressure Vessels, and Skids.
View All ProductsFree Application Review
Share your process conditions or project description. Our engineering team will provide a preliminary equipment recommendation — no charge, no obligation.